e24hr

Grizzly H8089 1250 lb. Low Profile Transmission Jack

Product Description
This Low Profile Transmission Jack has a lifting range of 6 5/8″ to 24 5/8″ and the adjustable support table measures 10 3/16″ square. Four iron casters and pivoting handle make positioning this jack under the transmission easy. Approx. shipping wt: 110 lbs.

Similar Products

CustomerReviews

Excellent Product and Value
My sons and I are drag racers with a variety of different vehicles. Changing out a transmission or converter is a tough assignment with the car just sitting in the garage on stands. Normally a floor jack and a piece of plywood were our tools of choice for this chore, but no more. When I purchased this paying just $119 I figured it might be a bit on the cheap side as far as construction goes, but with the limited use that we had for it, we would be okay. I was totally blown away when I opened the box. The construction on this jack is fantastic, heavy duty components are utilized and the welding is very good. I am not sure that you could build one yourself from scratch for the price. The handle moves in a 360 arc so no problem with not being in the right position to use the jack, the low profile means that with a car on standard jackstands there is plenty of room to drop an automatic transmission down and roll it out from under the car. Storage for the unit is good too as it is easy to stand it up against a wall in the garage taking up less floor space.

If you are looking for this type of jack, I really believe that you cannot go wrong with this purchase. We have used ours a couple of times already with zero issues and compared to our previous method, this is almost too easy. Imagine putting a floor jack under the car, then sliding a complete automatic transmission under the car and then lifting the transmission onto the floor jack in that limited space! That was our previous method. Now we just put the transmission on the Grizzly jack, slip the safety chain in place and wheel it under the car and up it goes. No fussing and no more cursing.

Grizzly Transmission Jack
I used it to replace a transmission on my Toyota 4X4. Worked very well

really easy to move around and great adjustability. If you do your own transmission work get one it saves a lot of lifting and straining

More Info: Grizzly H8089 1250 lb. Low Profile Transmission Jack

$$$Low Price Evenflo Embrace Infant Car Seat Base Black

admin — Sat, 04 Sep 2010 19:08:05 +0000

Evenflo Embrace Infant Car Seat Base Black

Product Description
Features: For use with Embrace Infant Car Seats only 3-position adjustable base with easy to use adjuster Base position indicator window Central Track Ball Angle indicator Integrated contoured base Locking Clip included Includes LATCH Benefits: Ideal for use in second car Adjusts to ensure proper angle for baby Convenient stay in car base Gift Wrap not available. Shipping Note: This item ships via UPS Ground within contiguous United States only. Cannot be shipped to AK/HI, PO boxes, US territories, or APO/FPO addresses.

Feature

For use with Embrace Infant Car Seats only
3-position adjust base with an easy to use adjuster
Includes a base position indicator window and a central track ball angle indicator

Similar Products

[iframe: src=http://rcm.amazon.com/e/cm?t=wwwbathbodysh107-20&o=1&p=8&l=as1&asins=B001H0GGRS&fc1=000000&IS2=1&lt1=_blank&m=amazon&lc1=0000FF&bc1=999999&bg1=FFFFFF&f=ifr style=width:120px;height:240px; scrolling=no marginwidth=0 marginheight=0 frameborder=0] [iframe: src=http://rcm.amazon.com/e/cm?t=wwwbathbodysh107-20&o=1&p=8&l=as1&asins=B001H0GGJG&fc1=000000&IS2=1&lt1=_blank&m=amazon&lc1=0000FF&bc1=999999&bg1=FFFFFF&f=ifr style=width:120px;height:240px; scrolling=no marginwidth=0 marginheight=0 frameborder=0] [iframe: src=http://rcm.amazon.com/e/cm?t=wwwbathbodysh107-20&o=1&p=8&l=as1&asins=B000DZS720&fc1=000000&IS2=1&lt1=_blank&m=amazon&lc1=0000FF&bc1=999999&bg1=FFFFFF&f=ifr style=width:120px;height:240px; scrolling=no marginwidth=0 marginheight=0 frameborder=0] [iframe: src=http://rcm.amazon.com/e/cm?t=wwwbathbodysh107-20&o=1&p=8&l=as1&asins=B000056J8F&fc1=000000&IS2=1&lt1=_blank&m=amazon&lc1=0000FF&bc1=999999&bg1=FFFFFF&f=ifr style=width:120px;height:240px; scrolling=no marginwidth=0 marginheight=0 frameborder=0] [iframe: src=http://rcm.amazon.com/e/cm?t=wwwbathbodysh107-20&o=1&p=8&l=as1&asins=B002VUCB9U&fc1=000000&IS2=1&lt1=_blank&m=amazon&lc1=0000FF&bc1=999999&bg1=FFFFFF&f=ifr style=width:120px;height:240px; scrolling=no marginwidth=0 marginheight=0 frameborder=0]

CustomerReviews

Evenflo Embrace Infant Car Seat Base
Having only a 2 door car it made sense to have a base for my grandchild’s car seat. It’s safer for her and more convenient for me!!

Car Seat Base
Base is very easy to install. It has a 3-position adjustment feature for the recline which the base that came with my carseat did not have. This means you can fit the base to any car without having to use a rolled up towel to correct the recline. I am happy with this base.

Yep, works fine.
Works as stated. Using it as a secondary base and it’s just as good as the one that came with the car seat.

convinient
between two cars and daycare, this has made it a lot easier. one carseat and 3 bases and we don’t have to stress about moving her around or the seat being not strapped in properly due to moving it.

a back up base
With two new grandsons, it is most convenient to have my own base and I also made sure both parents of both babies had a base in their car so we never have to worry about leaving the base with the baby, or going to leave with the baby only to find out the base is in the other car. I think all baby seats should come with TWO bases.

More Info: Evenflo Embrace Infant Car Seat Base Black

##Cheapest! Westin 47-1225 T-Max 12V ATV Winch

admin — Sat, 04 Sep 2010 16:35:05 +0000

Westin 47-1225 T-Max 12V ATV Winch

Product Description
Westin T-Max Winches offers you maximum off-road recovery products. ATV 2500 single line winch is powered by a permanent magnet DC 12 volt with 3.7 horsepower and 2.7 kilo watt output

Feature

Rated at 2500 pounds
36 feet 5/32 – inch diameter wire rope
Differential planetary
153:01:0 gear ratio
14 pounds

Similar Products

More Info: Westin 47-1225 T-Max 12V ATV Winch

++For Sale! ALPS Mountaineering Osage 3 Room Tent

admin — Sat, 04 Sep 2010 16:05:08 +0000

ALPS Mountaineering Osage 3 Room Tent

Product Description
The Osage 3 Room is a Free Standing 4 Pole Design with Shock Corded Fiberglass Poles. The poles attach to the tent with Clips and at the corners with Ring & Pins for fast and easy set-up. Multi-pass Urethane Coating is applied on the fly and floor for maximum weather protection. The floor Seams are Factory Sealed for even greater waterproofness. The roof is breathable 1.9 oz nylon taffeta with 3 Mesh Vents for great ventilation. 2 Large mesh windows (one in the back and one in the front door) and side windows offering excellent venting & visibility. A hooded Fly at the front and rear permit venting of the windows in any weather. Fly attaches to the tent with stress absorbing Shock-cords & S-hooks. The Door “hinges to the side” for easy entry & exit. Guy-out Loops on the Fly add support in wind and rain. Mesh Storage Pockets, Flashlight Loop and Gear Loft Included. Includes 8″ Steel Stakes, Carry Bags and Guy Ropes. Polyester Taffeta Fly. 3-Season Tent.

Feature

Three-season, four-pole family camping tent with dividers to create three rooms
Multi-pass urethane coating applied on fly and floor for maximum weather protection
Hooded fly at the front and rear permit venting of the windows in any weather
Mesh storage pockets, flashlight loop, gear loft
Includes carry bag stakes, and guy ropes

Similar Products

CustomerReviews

Good value for money – spacious!
We were going car camping and wanted something that could easily fit an air mattress and have room for the dog bed. We felt ridiculously luxurious after everything was set up (which was pretty easy – two person job, though, since all the poles are super long) because it is HUGE in there. We’re so used to a small 1.5 person tent.

This tent was less expensive than the smaller one that we have, so I am amazed that it even remained intact and felt decently made! We fit a full-sized air mattress, though it probably and easily could have fit queen.

The zippers got caught semi-frequently when opening the door flap and the tent did not come with a footprint. We also stayed in an area where it was relatively warm (49F) and very dry. My partner has a feeling the tent might leak if it were rainy because of the way the seams were placed.

Really great value for the money. We’re only planning on using it here and there, so we were quite pleased with the way its trial run experience went!

Easy to set up and quality tent
We purchased this tent recently and its a great deal. Honestly, REI sells this tent and they have high standards for quality. It comes with a lifetime warrenty. I purchased this product because i know that Alps Mountaineering makes great affordable stuff that is made to standup to the elements. I have a 3 person dome tent by them as well that my husband and i have used in many rainy and windy conditions. We were always dry and comfy.

We have not used this tent in wet conditions yet but i am not worried. We puchased it so that we could have seperation between us and our toddler. The room divider works like it suppose to- makes it so you cant see what is going on in the other room. Novelty! Dont expect a door to seperate the rooms- its a tent and not an RV.

It took us less then 3 minutes to set up this tent and the fact that its self standing makes it so easy to set up in any area.

Looking forward to many years in this tent

GREAT for the price
You can’t get a tent with multiple rooms (great for famiy camping) for less than $350.00, so this tent is a score. I looked at other multi-room tents and they looked like they were made to serve as basecamp tents for Everest! Since when did a family of 5 need a tent like that to go car camping in a state park? This is the perfect balance of price and quality. The tent was not super hard to out up, but not super easy. I think any 6 or 7 person tent is a little more tricky to get up the first time or two…this one is about like the rest. The tent body is very good quality and seems to be very durable. The fly worked GREAT…we had some pretty steady rain all night one night and no one got wet. Good ventilation which reduced condesation.

Bottom-line: If you are looking to do multi-day car camping with you family and you have other things in life to spend as mush as $400.00 on, THIS TENT IS FOR YOU! If you want to take a group of five up Mt. Everest….maybe there are more appropriate tents out there…but get your check books out!

not worth the money
This tent was very hard to set up, not to mention cheaply made. the only place you can stand straight up, if you are tall, is in the very center of the tent. the rainfly would probably not do a whole lot if it were to rain. sad i purchased it.

More Info: ALPS Mountaineering Osage 3 Room Tent

~~@Cheapest! Curt Manufacturing 11768 Class I Receiver

admin — Sat, 04 Sep 2010 15:08:07 +0000

Curt Manufacturing 11768 Class I Receiver

Product Description
All CURT hitches feature WeatherTite construction, which prevents rusting from the inside out by sealing the main body of the hitch. The receiver tube has an open back end to allow for easy cleaning and for dirt and moisture to pass through and not get trapped as is common with other brands of hitches. All CURT hitches come with mounting hardware and installation instructions. CURT is the only hitch company in the industry that mechanically de-scales all of our hitches before applying a thick powder coat finish, which is baked on for a high-gloss, smooth surface. CURT trailer hitches are simply the most attractive, most durable and toughest hitch on the market. You won’t find better quality and value anywhere!

Feature

1-1/4″ Receiver Tube Opening
Gross Trailer Weights (GTW) and Tongue Weights (TW) vary by application
Never exceed vehicle weight rating
Ball Mount, Pin & Clip included. Hitch Ball sold separately
Limited Lifetime Warranty to original purchaser

Similar Products

CustomerReviews

EASY INSTALLATION
I put this hitch on 2003 Honda CRV in 45 minutes, it was a piece of cake didn’t even need a jack. Everything lined up perfectly. My only complaint is that the muffler clunks against the hitch when I am turning or on rough roads. I willl need to grind some metal off the hitch, not a lot but enough to be annoyingly tedious.

More Info: Curt Manufacturing 11768 Class I Receiver

#$Order Now Warn 5744 Vertical Shaft Roller

admin — Sat, 04 Sep 2010 13:39:09 +0000

Warn 5744 Vertical Shaft Roller

Product Description
This is a replacement for the vertical shaft roller as part of the winch assembly.

Feature

Replacement vertical shaft roller for winch assembly

Similar Products

More Info: Warn 5744 Vertical Shaft Roller

####Look Superwinch 1430200 S3000 Series Master Winch

admin — Sat, 04 Sep 2010 13:16:09 +0000

Superwinch 1430200 S3000 Series Master Winch

Product Description
Superwinch S3000 Series Master Winch is designed to be compact and dependable for all the vehicles utility needs. It can also be used effIciently at workshops, trailers and for jobs around the house. This winch features mechanical and dynamic braking. It includes a free-spooling drum for fast wire payout. It consists of 15-foot handheld remote switch made from cable tension plate for better performance. This winch is engineered with high-efficiency low amp draw motor and protected circuit breaker. It is pre-mounted and sealed to protect from elements. It is backed by 1 year warranty for defects in materials and workmanship.

Feature

12-Volt DC winch with a capacity to pull 3,000 lbs
Galvanized wire rope measures 60′ x 3/16″
Hand-held rubber remote switch with 30-ft lead for easy operation
Dimensions measure 15.1″l. x 8.7″d. x 6.0″h; 38-lbs
30′ Hand Held Remote

Similar Products

[iframe: src=http://rcm.amazon.com/e/cm?t=wwwbathbodysh102-20&o=1&p=8&l=as1&asins=B00008PWWI&fc1=000000&IS2=1&lt1=_blank&m=amazon&lc1=0000FF&bc1=999999&bg1=FFFFFF&f=ifr style=width:120px;height:240px; scrolling=no marginwidth=0 marginheight=0 frameborder=0]

More Info: Superwinch 1430200 S3000 Series Master Winch

~~$OrderNow! Reese Towpower 77156 Insta-Hitch Class I Hitch Receiver

admin — Sat, 04 Sep 2010 11:47:08 +0000

Reese Towpower 77156 Insta-Hitch Class I Hitch Receiver

Product Description
Reese Towpower Insta-Hitch Class I Hitch Receiver is designed to provide excellent towing facility. It features black powder coat finish which offers rust resistance. This hitch receiver features a 1.25 inch hitch box opening and comes with a draw bar, pull pin and clip with hitch box cover. It has a capacity of up to 200 pounds of tongue weight and 2,000 pounds of gross trailer weight.

Feature

Designed to provide excellent towing facility
1.25 square tube
Includes draw bar, pull pin and clip with hitch box cover
No drill for fast and easy installation

Similar Products

More Info: Reese Towpower 77156 Insta-Hitch Class I Hitch Receiver

~#$ForSale! Snuggin Go – Light Blue

admin — Sat, 04 Sep 2010 09:23:16 +0000

Snuggin Go – Light Blue